Name: Automatic Screw Feeder,Screw Arranging Machine with Counting Function,Track Width and Brush Height Adjustable Screw Feeder for Electronics, Plastics, Electrical Appliances
Brand: ACNAO
SKU: YT260824J7P8NXHB
Price: 48.56 USD
Availability: InStock

Automatic Screw Feeder,Screw Arranging Machine with Counting Function,Track Width and Brush Height Adjustable Screw Feeder for Electronics, Plastics, Electrical Appliances

$48.56 $128.00

This automatic screw feeder is well-designed, practical, inexpensive, and efficient. It is made of high-quality metal, which ensures long-term use. The counting function can well let you know the number of screws used. It is suitable for the assembly of electronic processing factories, which can greatly improve efficiency.DetailsRounded Corners and Edges: The corners are rounded and smooth to reduce collisions and improve safety.Clear LCD Display: It clearly displays the number of counts for your convenience.4 Non-slip Feet: They stabilize the product and make it less likely to tip over, while the raised bottom also provides effective ventilation to avoid overheating the machine.Clear Cover: It allows you to see the amount of remaining screws for timely refilling. In addition, the circular hole on the cover plate is convenient for you to open it.V-shaped Slot: It makes the screws come out one by one and won't clog easily.ApplicationIt is mainly used in industries in the assembling process of electronics, plastics,electrical appliances, and communication equipment.Counting Function1. Press and hold A until the countdown begins and d.XXX is displayed, and enter the fixed number setting function.2. Press A to increase the parameter.3. Press B to decrease the parameter.4. After setting the parameter, press F to save and exit. (When the fixed number function is not needed, you can follow the above steps and set the parameter to d.000 to restore the normal counting function.)SpecificationsMaterial: MetalStyle: ModernColor: Red, BlackMount Type: DesktopAssembly Required: NoPlug Type: US StandardPower Source: Corded ElectricScrew Compartment Capacity: Depending on the Size of the ScrewsCounting Function: Countable 9999Adjustable Speed Gear: 5 GearsDisplay Type: LCDAdapter Input Voltage: 100-240V, 50/60Hz, 1AAdapter Output Voltage: 12V, 2A, 24WApplicable Screw Length: Within 20mm/0.79inApplicable Screw Diameter/Adjustable Track Width: 1-5mm/0.04-0.2in (Optimal Usage Range: M2-M4)Gross Weight: 3.3kg/7.27lbsNet Weight: 3kg/6.61lbsProduct Size: 12.5*15*18cm/4.92*5.9*7.09inPackage Size: 24*18*17cm/9.45*7.09*6.69inPackage Included1* Automatic Screw Feeder1* Power Adapter1* Chinese Manual1* ScrewdriverNotes1. Please note that this product does not contain screws and electric screwdriver.2. Please note that to avoid damaging the machine, disconnect the power supply before adjusting the machine.3. Please take care to use electricity safely and keep the product out of the reach of children.4. Please note that the brush should be installed as far as possible to the screw position, not too high or too low.5. Please note that when removing the screws, take care to slide down vertically to select the screws first, and then pull the screws forward horizontally.6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.